Table 19 B-series Fibre Channel switches and routers
Number of ports
Fabric Management
Firmware versionsHP StorageWorks switch name DCFM
2
FM
1
16 at 8 Gb/s Fibre Channel
6 at 1 GbE FCIP
10.3.3
10.3.1
10.3.0
N/A
6.3.1
6.3.0c
6.3.0b
6.3.0a
6.3.0
HP StorageWorks 1606 Extension SAN Switch
12 at 8 Gb/s Fibre Channel
10 at 1 GbE FCIP
2 at 10 GbE FCIP
HP StorageWorks DC SAN Director
Multi-protocol Extension Blade
2 internal
10 external
10.3.3
10.3.1
10.3.0
10.1.4
10.1.3
10.1.2
5.5
3
6.2.1b
6.2.1
6.2.0g
6.2.0e
6.2.0d
6.2.0b
6.3.1
6.3.0c
6.3.0b
6.3.0a
6.3.0
6.2.2a
6.2.2
HP StorageWorks EVA4400 Embedded Switch
Module, 8 Gb Brocade
16 at 1, 2, or 4 Gb/s Fibre
Channel
2 at 1 GbE FCIP
6.2.0g
6.2.0e
6.2.0d
6.2.0b
6.1.2b
6.1.2a
6.1.2
6.3.1
6.3.0c
6.3.0b
6.3.0a
6.3.0
6.2.2a
6.2.2
6.2.1b
6.2.1
HP StorageWorks Multi-protocol Router Blade
8 at 1, 2, or 4 Gb/s Fibre
Channel
8 at 1 GbE iSCSI
HP StorageWorks iSCSI Director Blade
1
FM = Fabric Manager
2
DCFM = Data Center Fabric Manager
3
Using HP StorageWorks Fabric Manager (FM) 5.5 or earlier with Fabric OS 6.1.1 or later can result in problems with Zoning, Performance
monitoring, SYSLOG configuration, FICON wizards, IOD Delay, AAA replication, Port enable/disable, and other functions. Fabric Manager
is not recommended for fabrics running these versions of Fabric OS, and is not supported with Fabric OS 6.3.x.
SAN Design Reference Guide 97
To Next Page
Loading...
