XP and VA SAN boot support
XP and VA LUNs can be booted from the SAN using B-series, C-series, and M-series switches.
SAN boot through the B-series MP Router is not supported.
Support for booting from the SAN depends on:
• PDC
• Firmware
• HBA
• Operating system and version
• Fibre Channel port speed
For support information, contact your HP representative.
Table 136 indicates high-level boot support where at least one combination of storage system, HBA, operating
system type, and switch is supported as a bootable configuration.
Table 136 XP and VA SAN boot support by operating system
XenIRIX
Novell
nl
NetWare
IBM
nl
AIX
Sun
nl
Solaris
Open-
VMS
2
Tru64
nl
UNIX
2,
3
WindowsLinuxHP-UX
Storage
systems
1
Switches
•——•••••••XP24000B-series
C-series
M-series
•——•••••••XP20000
•——•••••••XP12000
•——•••••••XP10000
—•••••••••XP1024
—•••••••••XP128
—••—••••••XP512
—••—••••••XP48
—————•••••VA7410
—————•••••VA7400
—————•••••VA7110
—————•••••VA7100
1
Legend: • = supported; — = not supported
2
XP24000/XP20000 boot on OpenVMS and Tru64 requires Alpha Server console 7.3 or later.
3
XP12000/10000 boot on OpenVMS and Tru64 requires Alpha Server console 6.9 or later.
LUN Configuration and Security Manager XP support
LUN Configuration and Security Manager XP:
• Is an array-based, LUN security and configuration tool
XP and VA storage system rules268