• SUSE Linux Enterprise Server 10, 10 SP2, SP1
• SUSE Linux Enterprise Server 9 SP4, SP3
EVA and EVA4400 iSCSI Connectivity Options supported maximums
Table 184 lists the maximums supported by the EVA and EVA4400 iSCSI Connectivity Options using
the mpx100/100b bridge.
Table 184 Supported EVA iSCSI Connectivity Option maximums
Maximum per EVA or EVA4400 iSCSI Connectivity OptionDescription
Hardware
1EVA storage system
2mpx100/100b
Configuration
mpx100—150 (single-path or multipath)
mpx100b (EVA4400 only)—16, 48 (license upgrade 1),
150 (license upgrade 2) (single-path or multipath)
Note: The mpx100/100b can serve both single-path and
multipath LUNs concurrently.
Total number of iSCSI initiators
150Total number of iSCSI LUNs
8Total number of iSCSI targets per initiator
General rules for the EVA and EVA4400 iSCSI Connectivity Options
NOTE:
The EVA iSCSI Connectivity Option (mpx100) is supported with EVA4000/4100/4400/4400
(embedded switch)/6000/6100/6400/8000/8100/8400 and EVA3000/5000 storage systems.
The EVA4400 iSCSI Connectivity Option (mpx100b) is supported with EVA4400 and EVA4400
(embedded switch) storage systems.
Use the following general rules when implementing the EVA or EVA4400 iSCSI Connectivity Option:
• Each EVA storage system can have a maximum of two mpx100 or two mpx100b bridges.
• Each EVA controller host port can connect to a maximum of two mpx100/100b Fibre Channel
ports.
• Both mpx100/100b Fibre Channel ports can only connect to one EVA storage system.
• Each mpx100/100b Fibre Channel port can only connect to one EVA port.
• Each iSCSI initiator can have a maximum of eight mpx100/100b iSCSI targets.
Table 185 describes the maximum number of servers, initiators, and LUNs supported for combined iSCSI and
Fibre Channel connectivity to an EVA configured with an mpx100 or 100b.
SAN Design Reference Guide 375
To Next Page
Loading...
