Meshed to core-edge
Use the method described in Cascaded to core-edge on page 58.
Migrating a ring fabric SAN
This section describes migration paths for a ring fabric SAN.
Ring to meshed
If you have two ISLs between all switches in the ring fabric, re-cable each ISL so that it connects to
the appropriate switch in the meshed fabric you design.
Ring to core-edge
This migration is less disruptive if you have two ISLs between all switches in the ring fabric SAN. Use
the method described in Cascaded to core-edge on page 58.
SAN Design Reference Guide 59
To Next Page
Loading...
