Table 97 HP-UX multipathing coexistence support
1
XP128/1024/
10000/12000/
20000/24000
EVA
nl
4000/4100/4400/
6000/6100/8000/
8100 XCS 6x
3
nl
4400 XCS 09
x
nl
6400/8400 XCS
0950x
EVA3000/5000
nl
VCS 4
x
MSA2000fc G2
nl
(MSA2300fc)
Notes
2
VDPLSPVDPLSPVDPLSPVDPLSP
—SS—SS—SS—SSSP
MSA2000fc G2
(MSA2300fc)
—SS—SS—SS—SSPL
S——S——S——S——VD
—SS—SS—SS—SSSP
EVA3000/5000 VCS 4x
—SS—SS—SS—SSPL
S——S——S——S——VD
—SS—SS—SS—SSSPEVA4000/4100/4400/
6000/6100/8000/8100
XCS 6x
4400 XCS 09
x
6400/8400 XCS 0950x
—SS—SS—SS—SSPL
S——S——S——S——VD
—SS—SS—SS—SSSP
XP128/1024/10000/
12000/20000/24000
—SS—SS—SS—SSPL
S——S——S——S——VD
1
Legend: D = same server and different HBA; S = same server and HBA; — = not supported; sc = single controller; SP = Secure Path; PL
= PvLinks; VD = Veritas DMP
2
General rules:
• EVA and XP require Secure Path 3.0f SP4 or later.
• When using Secure Path and Veritas DMP, coexistence is not supported.
• HP-UX 11i v3 is supported with native multipathing. Secure Path is not required or supported. Migration from Secure Path to native
multipathing is included in HP-UX 11i v3. Contact an HP storage representative for more information.
• All HP-UX 11i v3 supported storage systems on the same server using native multipathing software.
3
EVA4100/6100/8100 requires a minimum of XCS firmware 6.110.
For more information about storage system coexistence, see
“Heterogeneous SAN storage system coexistence” on page 232.
SAN Design Reference Guide 213