HP StorageWorks 4000/6000/8000 - Enterprise Virtual Arrays - MPX200 Iscsi Rules and Supported Maximums; MPX200 Single-Blade Direct Connect to One EVA Configuration; MPX200 Dual-Blade Direct Connect to Two EVA Configuration

GE1 GE2
IOIOI
FC1 FC2MGMT
GE4
GE3
HP StorageWorks
MPX200
1 GbE Blade
MPX200 Multifunction Router
EVA
storage system
26640a
GE1
MGMT
IP network
management
(WAN/LAN)
IP network
iSCSI data
(LAN/VLAN)
iSCSI
B
A
FC1 FC2
FP1 FP2
FP2
FP1
NIC
MPX200
Figure 132 MPX200 single-blade direct connect to one EVA configuration
.
GE1 GE2
IOIOI
FC1 FC2MGMT
GE4
GE3
HP StorageWorks
MPX200
1 GbE Blade
MPX200 Multifunction Router
EVA
storage system
26641a
GE1
MGMT
IP network
management
(WAN/LAN)
iSCSI
B
A
FC1 FC2
FP1 FP2
FP2
FP1
NIC
MPX200 blade 2
GE1 GE2
IOIOI
FC1 FC2MGMT
GE4
GE3
HP StorageWorks
MPX200
1 GbE Blade
MPX200 Multifunction Router
GE1
MGMT
FC1 FC2
MPX200 blade 1
IP network
iSCSI data
(LAN/VLAN)
B
A
FP1 FP2
FP2
FP1
Figure 133 MPX200 dual-blade direct connect to two EVA configuration
.
MPX200 iSCSI rules and supported maximums
The MPX200 chassis can be configured with one or two blades. Dual-blade configurations provide
for high availability with failover between blades. All dual-blade configurations are supported as
redundant pairs only. iSCSI-connected servers can be configured for access to one or both blades.
NOTE:
In the event of a failover between blades, servers with single-blade connectivity to a failed blade will
no longer have connectivity to the MPX200.
Table 180 lists the supported maximums for the MPX200.
iSCSI storage364