HP StorageWorks 4000/6000/8000 - Enterprise Virtual Arrays - Multipath Software; Command View EVA Iscsi Connectivity Configuration 2

FC1
FC2
GE1
GE2
MGMT
HP StorageWorks
mpx100
IOIOI
!
FC1
FC2
GE1
GE2
MGMT
HP StorageWorks
mpx100
IOIOI
!
GE1
MGMT
FC1 FC2 GE1
MGMT
FC1 FC2GE2 GE2
26485b
D1
D4
D3
D2
Discovery
IP Address
Presented
iSCSI Targets
D1 FP2A
FP2B
FP2A
FP2B
D2
FP1A
FP1B
FP1A
D3
D4
FP1B
IP Network
management
(WAN/LAN)
iSCSI initiator &
Command View
EVA server
NIC
IP Network
iSCSI data
(LAN/VLAN)
EVA
Storage System
mpx100/100b 1 mpx100/100b 2
Figure 139 Command View EVA iSCSI connectivity configuration 2
.
Multipath software
The EVA iSCSI Connectivity Option supports iSCSI multipath connectivity on HP OpenVMS, Microsoft
Windows with MPIO, Linux with Device Mapper, and Sun Solaris and VMware ESX with MPxIO.
iSCSI multipath connectivity is supported on EVA4000/4100/4400/4400 (embedded
switch)/6000/6100/6400/8000/8100/8400 and the EVA3000/5000 (active/active).
The EVA4400 iSCSI Connectivity Option supports iSCSI multipath connectivity on Microsoft Windows
with MPIO, Linux with Device Mapper, and Sun Solaris and VMware ESX with MPxIO. iSCSI multipath
connectivity is supported on EVA4400 using XCS 09000000 (minimum) or EVA4400 (embedded
switch) using XCS 09003000 (minimum).
NOTE:
For the latest information on version support, see the product release notes or SPOCK at
http://www.hp.com/storage/spock. You must sign up for an HP Passport to enable access.
Figure 140 illustrates the high-availability, multipath direct connect iSCSI-Fibre Channel attachment
mode configuration with Windows MPIO.
iSCSI storage372