HBA configuration
• Host 1 is a single path HBA host.
• Host 2 is a multiple HBA host with multipathing software.
See Figure 31.
Risks
• Single path failure may result in loss of data accessibility and loss of host data that has not been
written to storage.
• Controller shutdown results in loss of data accessibility and loss of host data that has not been
written to storage.
NOTE:
For additional risks, see “Sun Solaris” on page 75.
Limitations
• HP Continuous Access EVA is not supported with single path configurations.
• Single path HBA server is not part of a cluster.
• Booting from the SAN is not supported.
8
6
5
4
3
2
1
26464a
7
Figure 31 SUN Solaris configuration
5. SAN switch 11. Network interconnection
Single path implementation64
To Next Page
Loading...
Need help?
General