How to CorrectMeaningStatus Code Value
Retry the request later.
Another process has already taken the
SCMI lock on the storage system.
97
Storage system could not be
locked. System busy. Try
command again.
'Resolve the condition and retry the
request
While the request was being performed,
an error occurred on the remote storage
system.
98
Error on remote storage
system.
Resolve the condition and retry the
request.
The request failed because the operation
cannot be performed on a Continuous
Access connection that is up.
99
The DR operation can only be
completed when the
source-destination connection
is down. If you are doing a
destination DR deletion, make
sure the connection link to the
source DR system is down or
do a failover operation to
make this system the source.
The storage system password may
have been re-configured or re-
moved. The management software
must be used to set the password
up to match the device so commu-
nication can proceed.
The management software is unable to
log into the device as the password has
changed.
100
Login required - password
changed.
HP StorageWorks 4400 Enterprise Virtual Array user guide 91
To Next Page
Loading...
Need help?
General