HP StorageWorks P9000 - Page 101

Table 36 Error codes (part code 3205) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WReduce the number of V-VOLs registered
in the storage system, then retry the
configuration operation.
The number of V-VOLs that can be
registered in the storage system has
reached the maximum.
65343205
WRelease the LUN Path, then change the
configuration again.
The configuration cannot be changed
because the LUN Path is remained in the
target volume.
65353205
WRelease the LUSE volume, then change
the configuration again.
The target volume cannot be changed
due to its LUSE configuration.
65363205
WCheck the error factor in the others
settings.
The setting process has not been
executed because there is no error in this
setting, but an error in the others settings.
65373205
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
80003205
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
80013205
WCheck whether the DKCMAIN
microprogram version and the SVP
microprogram version are mismatched.
This function is not supported.81023205
WRelease the configuration definition of
Compatible FlashCopy, then retry the
operation.
The configuration of Compatible
FlashCopy is defined.
81403205
EIf this problem persists, please contact
HP Technical Support.
An error occurred on the DKC side.89583205
EIf this problem persists, please contact
HP Technical Support.
An error occurred on the DKC side.89663205
WCheck the emulation type. If you want to
change the cache segment size to set the
specified emulation type, please contact
HP Technical Support.
An emulation type that cannot be added
is specified.
565133205
WRelease the configuration definition for
Continuous Access Synchronous or
Continuous Access Synchronous Z, then
retry the operation.
The configuration of Continuous Access
Synchronous or Continuous Access
Synchronous Z is defined.
565163205
WRelease the configuration definition for
Business Copy, Business Copy Z, or
Snapshot, then retry the operation.
The configuration of Business Copy,
Business Copy Z, or Snapshot is defined.
565173205
WRelease the reserved volume setting for
Business Copy or Business Copy Z, then
retry the operation.
The reserve volume setting for Business
Copy or Business Copy Z is defined.
565193205
WRelease the reserved volume setting for
Auto LUN, then retry the operation.
The reserved volume setting for Auto LUN
is defined.
565203205
WRelease the configuration definition of
Continuous Access Journal or Continuous
Access Journal Z, then retry the
operation.
The configuration of Continuous Access
Journal or Continuous Access Journal Z
is defined.
584063205
WRelease the journal volume setting of
Continuous Access Journal or Continuous
Access Journal Z, then retry the
operation.
The reserved volume setting for
Continuous Access Journal or Continuous
Access Journal Z is defined.
584073205
Part code 3205 101