Table 36 Error codes (part code 3205) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WCheck if the configuration changing
process by RAID Manager, Auto LUN,
or Quick Restore is not in the operation,
then retry the operation.
The configuration changing processes
are conflicting at DKC.
657403205
WCheck the specified V-VOL.The specified V-VOL is not mounted.657943205
WExclude the duplicated setting, then retry
the operation.
The specified V-VOL has already been
specified.
657953205
WChange the emulation type to be set in
the volume.
The specified emulation type cannot be
set because 3390-3R is set in the storage
system.
660133205
WChange the emulation type to be set in
the volume.
The specified emulation type cannot be
set because 3390-3 is set in the storage
system.
660143205
WCheck the setting of LDKC, CU, and
LDEV.
LDKC, CU, and LDEV are not set within
the range where they can be used.
665033205
WCheck the setting of LDKC, CU, and
LDEV.
Specified LDKC:CU:LDEV has already
been used.
665043205
WCheck the setting of emulation groups
within the range grouped by 32LDEV
numbers.
The specified LDEV number has already
been assigned to another emulation
group within the range grouped by 32
LDEV numbers.
665053205
WCheck the setting of SSID.Specified SSID has already been used.665063205
WCheck the setting of LDEV capacity.The specified LDEV capacity is invalid.665083205
WCheck the setting of emulation type.The specified emulation type cannot be
used.
665103205
WCheck the setting of CLPR.Specified CLPR is not mounted.665123205
WCheck the mounted packages.Mainframe volume and intermediate
volume cannot be set because the
package for mainframe system is not
mounted.
665203205
WCheck the setting of SSID.The value of SSID is not set within the
available range.
667473205
WCheck the setting of SSID.A value different from SSID that has
already been set is specified.
667483205
WDelete unnecessary Thin Provisioning
Pools (THP) and Thin Provisioning
volumes (V-VOL), then retry the
operation. If this problem persists, please
contact HP Technical Support.
The shared memory for the V-VOL
management area is insufficient.
687253205
WCheck the capacity of Thin Provisioning
volume (V-VOL).
The capacity of Thin Provisioning volume
(V-VOL) is invalid.
687263205
WRecover the pool, then retry the
operation.
The pool is in an abnormal state.687283205
WRestore the blocked status of the system
disk. If the status cannot be restored,
please contact HP Technical Support.
A volume used as system disk is included
in the items to be maintained.
687353205
102 Message (part code group 3nnn)
To Next Page
Loading...
