HP StorageWorks P9000

Table 50 Error codes (part code 6005) (continued)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
WWait a while, then retry the
operation.
A communication time-out error
occurred between MCU and RCU.
Please wait for a while, and then retry
the operation.
585096005
WConfirm that the shredding
has completed in the Data
Retention window, then retry
the operation.
A pair cannot be created because the
specified M-VOL is being shredded by
Data Retention. Retry the operation after
the shredding is completed.
585686005
WConfirm that the shredding
has completed in the Data
Retention window, then retry
the operation.
A pair cannot be created because the
specified R-VOL is being shredded by
Data Retention. Retry the operation after
the shredding is completed.
585696005
WCheck whether the number
of the specified R-VOL is
correct or the status of the
usage of the host to the
specified R-VOL.
The operation failed because the host
did not allow the specified R-VOL to be
used as an R-VOL.
585866005
WCheck whether the version
of DKC microcode of RCU
supports the 4x4x4 cascade
function. If the version does
not support the 4x4x4
cascade function, update the
microcode of RCU to the
version that supports the
function, or retry the Add
Pair operation with the
setting that does not transfer
Time Stamp.
The Add Pair operation failed.
The volume pair cannot be created with
Time Stamp set, because RCU does not
support 4x4x4 cascade function.
586406005
WCheck the licensed capacity
of these program products.
See the user's guides of
Continuous Access
Synchronous or Continuous
Access Synchronous Z for
details of the licensed
capacities.
The licensed capacity of Continuous
Access Synchronous or Continuous
Access Synchronous Z on the RCU is
insufficient.
587126005
WCheck the licensed capacity
of these program products.
See the user's guides of
Continuous Access
Synchronous or Continuous
Access Synchronous Z for
details of the licensed
capacities.
The licensed capacity of Continuous
Access Synchronous or Continuous
Access Synchronous Z on the MCU is
insufficient.
587146005
WCheck if the configuration
changing process by RAID
Manager, Auto LUN, or
Quick Restore is not in the
operation, then retry the
operation.
The configuration changing processes
are conflicting at DKC.
657406005
WCheck whether the specified
R-VOL is a Thin Provisioning
volume.
The operation failed because the
specified M-VOL was used as a Thin
Provisioning volume.
680116005
162 Message (part code group 6nnn)