HP StorageWorks P9000

Table 53 Error codes (part code 6505) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WVolumes reserved by Auto LUN cannot
be specified as secondary data volumes.
Check the status of the specified
secondary data volume from the host or
the SVP.
The specified secondary data volume is
already reserved by Auto LUN.
88316505
WWait a few minutes and retry the
operation.
Please wait a few minutes and then retry
the operation.
88326505
WWait for a few minutes and retry the
operation.
Please wait a few minutes and then retry
the operation.
88336505
WSee license key information and check
the licensed volume capacity. To create
more pairs, please purchase a license
key for using larger capacity.
The Add Pair (Paircreate) operation
failed because you tried to create volume
pairs which exceeded the licensed
capacity.
88346505
WSee the license key at the secondary
storage system and check the licensed
capacity of volumes. To create more
pairs, please purchase a license key for
larger capacity.
The Add Pair (Paircreate) operation
failed because you tried to create volume
pairs which exceeded the licensed
capacity of the secondary subsystem.
88356505
ECheck the SSB log, then contact HP
Technical Support.
An internal error occurred.88876505
ECheck the SSB log, then contact HP
Technical Support.
An internal error occurred.88886505
WRefresh the window, and retry the
operation. If nothing changes, please
contact HP Technical Support.
The specified port is not equipped.88896505
WWait until the initialization of the port
ends, and retry the operation.
The specified port is being initialized.88906505
WDelete the logical paths on the port and
retry the operation.
Logical paths exist on the port.88916505
ECheck the SSB log, then contact HP
Technical Support.
An internal error occurred.88936505
WStop the jobs from the host and retry the
operation.
Jobs exist on the port.88946505
WStop the jobs from the host and retry the
operation.
Jobs exist on the port on the remote
subsystem.
88956505
WRefresh the window, and retry. If nothing
changes, please contact HP Technical
Support.
Parameter error has occurred.88966505
WDelete the LUs defined on the port, and
retry the operation.
LUs exist on the port.88976505
WRetry the operation.Pending data exists on the port.88986505
ECheck the SSB log, then contact HP
Technical Support.
An internal error occurred.88996505
EPlease contact HP Technical Support.An error occurred during the port
change.
89006505
EPlease contact HP Technical Support.An error occurred during the port
change.
89016505
182 Message (part code group 6nnn)