HP StorageWorks P9000

Table 59 Error codes (part code 7005) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WThe requested command cannot be
executed in the current status of
Continuous Access Synchronous pair.
See the section about sharing Business
Copy volumes in the HP StorageWorks
P9000 Business Copy User Guide for
the relationship between the state of the
Continuous Access Synchronous pair and
the Business Copy operations.
The command has been rejected,
because the specified P-VOL is used as
S-VOL of Continuous Access Synchronous
pair.
582617005
EAdd sufficient shared memory to create
a pair.
A pair cannot be created because
shared memory for differential tables is
insufficient.
582627005
WCheck the requirements for using the
volume with Continuous Access Journal.
The operation failed because the
specified P-VOL was a data volume of
Continuous Access Journal. Check the
requirements for using the volume with
Continuous Access Journal.
582997005
WRelease the Continuous Access Journal
setting or specify another volume.
The operation failed, because the
specified S-VOL was a data volume of
Continuous Access Journal.
583007005
WRelease the Continuous Access Journal
setting or specify another volume.
The reserve volume setting failed
because the specified volume was a data
volume of Continuous Access Journal.
583017005
WDelete the Continuous Access Journal
pair or execute the operation by other
pairs.
The Quick Restore command has been
rejected, because the specified pair
contains external volumes, and also is
used as a Continuous Access Journal
pair.
583517005
WRelease the pair of Continuous Access
Journal or pair of Continuous Access
Synchronous, then retry the operation.
The command has been rejected,
because the specified volume was used
by Continuous Access Journal and
Continuous Access Synchronous.
583567005
WIf the problem persists despite retrying,
please contact HP Technical Support.
The disk subsystem is in internal process.
Please retry the operation.
584517005
WRelease the Snapshot pair, or select
another volume.
The operation cannot be performed,
because the specified P-VOL is a P-VOL
for Snapshot.
584767005
WSpecify another volume.The operation cannot be performed,
because the specified P-VOL is a V-VOL
for Snapshot.
584777005
WRelease the pool volume or select
another volume.
The operation cannot be performed,
because the specified P-VOL is a pool
volume.
584787005
WRelease the Snapshot pair or select
another volume.
The operation cannot be performed,
because the specified S-VOL is a P-VOL
for Snapshot.
584797005
WSpecify another volume.The operation cannot be performed,
because the specified S-VOL is a V-VOL
for Snapshot.
584807005
WRelease the pool volume or select
another volume.
The operation cannot be performed,
because the specified S-VOL is a pool
volume.
584817005
244 Message (part code group 7nnn)