Table 59 Error codes (part code 7005) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WRelease the Snapshot pair, or select
another volume.
The operation cannot be performed,
because the specified reserved volume
is a P-VOL for Snapshot.
584827005
WSpecify another volume.The operation cannot be performed,
because the specified reserved volume
is a V-VOL for Snapshot.
584837005
WRelease the pool volume, or select
another volume.
The operation cannot be performed,
because the specified reserved volume
is a pool volume.
584847005
WRefresh the window, and check whether
the pair exists.
The Pairsplit-S operation has failed.
Check the configuration.
584927005
EMount the required PCB, then retry the
operation.
The PCB required for this operation is
not mounted. Check the subsystem
configuration.
584937005
EReplace the microcode, then retry the
operation.
The operation failed, because different
versions of microcodes coexisted in the
disk subsystem.
585207005
WRelease the journal volume setting, or
specify another volume.
The operation failed, because the
specified P-VOL was a journal volume.
585337005
WRelease the journal volume setting, or
specify another volume.
The operation failed, because the
specified S-VOL was a journal volume.
585347005
WRelease the journal volume setting, or
specify another volume.
The reserve volume setting failed
because the specified volume was a
journal volume.
585357005
WCheck the requirements for using the
volume with Continuous Access Journal.
The operation failed because the
specified S-VOL was a data volume of
Continuous Access Journal. Check the
requirements for using the volume with
Continuous Access Journal.
585367005
EAn error occurred on the DKC side. If
this problem persists, please contact HP
Technical Support.
An error occurred on the DKC side. If
this problem persists, please contact HP
Technical Support.
585727005
ECheck if the DKCMAIN and SVP
microcode versions are mismatched.
This function is not supported.585737005
EIf this problem persists, please contact
HP Technical Support.
An error occurred while connecting to
the subsystem.
585747005
EIf this problem persists, please contact
HP Technical Support.
An error occurred while connecting to
the subsystem.
585757005
EIf this problem persists, please contact
HP Technical Support.
A communication time-out error occurred
on the storage system.
585767005
WConfirm that the shredding has
completed in the Data Retention window,
then retry the operation.
The operation failed, because the
specified volume is being shredded by
Data Retention. Retry the operation after
the shredding is completed.
585797005
Part code 7005 245