HP StorageWorks P9000

Table 59 Error codes (part code 7005) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WThe specified command cannot be
executed with the current pair
composition.
See the section about the interoperability
with other products and functions and
the Business Copy described in the HP
StorageWorks P9000 Snapshot User
Guide for the condition of sharing the
volumes between Snapshot and Business
Copy.
The command has been rejected,
because the specified S-VOL is used as
P-VOL of Snapshot or the specified MU
number is already used.
585827005
WTo continue the operation, release the
Snapshot setting.
The operation failed because the volume
was shared by a Snapshot pair.
585837005
WCheck the conditions for using Business
Copy in conjunction with Snapshot.
The operation failed because the volume
was shared by a Snapshot pair in COPY
(RS-R) status.
585847005
WVolumes that do not belong to CU group
0 are currently not supported. Specify
another volume.
The operation failed because the CU
group of the specified volume is not
supported.
585857005
WThe command cannot be executed in the
current status of Continuous Access
Journal pair.
See the section about sharing Business
Copy volumes in the HP StorageWorks
P9000 Business Copy User Guide for
the relationship between the state of the
Continuous Access Synchronous pair and
the Business Copy operations.
The operation failed because the
specified P-VOL was used by Delta
resync of Continuous Access Journal.
586307005
WThe P-VOL of Continuous Access Journal
pair for Delta resync cannot be specified
as S-VOL. Specify another volume.
The operation failed because the
specified S-VOL was used by Delta
resync of Continuous Access Journal.
586317005
WThe P-VOL of Continuous Access Journal
pair for Delta resync cannot be specified
as a reserved volume.
Specify another volume.
The reserve volume setting failed
because the specified volume was used
by Delta resync of Continuous Access
Journal.
586327005
WRefresh the Business Copy window, and
check the MU number that can be used.
The operation failed because the
specified MU number was already used.
Specify other MU numbers.
587117005
WWhen you specify the volume to S-VOL,
specify V-VOL to P-VOL as well.
A pair cannot be created because the
volume specified as P-VOL is not a Thin
Provisioning volume (V-VOL) but the one
specified as S-VOL is.
680007005
WUse Reverse Resync.Quick Restore cannot be executed
because the pair contains Thin
Provisioning volume (V-VOL).
680017005
WSpecify other MU numbers.“0” cannot be specified as the MU
number of L2 pair.
Specify other MU numbers.
680217005
WAssociate the Thin Provisioning volume
with a pool, then retry the operation.
The command has been rejected,
because the specified P-VOL is a Thin
Provisioning volume not associated with
a pool.
687377005
246 Message (part code group 7nnn)