HP StorageWorks P9000 - Page 262

Table 62 Error codes (part code 7105) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
563027105
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
563037105
EPlease contact HP Technical Support.This function cannot be used by the
storage partition administrator.
565247105
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
571017105
WSelect a different volume or release the
consistency group setting.
The command has been rejected
because the cascade request for creating
cascade pairs composed of volumes
belonging to the same consistency group
was issued.
580007105
WWait until the L1 pair status changes to
Split, then retry the operation.
The Add Pair command for adding the
L2 pair has been rejected because the
L1 pair is in V-Split status.
580017105
WQuick restore operation cannot be
performed when the pair is composed
of a normal volume and a customized
volume (CV). Select a different pair.
The Quick Restore command has been
rejected because the specified pair is
composed of a normal volume and a
customized volume (CV).
580027105
WTo continue the operation, delete the
Remote Copy pair.
The command has been rejected
because a Remote Copy pair exists in
the same storage system.
580037105
WThe requested operation cannot be
performed. Check the status of the
specified volume.
The command has been rejected
because the issued request is an
operation that cannot be performed with
a volume that can be used from either
the mainframe or open-system hosts.
580047105
WDelete the Remote Copy pair or execute
the operation by other pairs.
The Quick Restore command has been
rejected, because the specified pair
contains external volumes, and also is
used as a Remote Copy pair.
582597105
WThe requested command cannot be
executed in the current status of
Continuous Access Synchronous Z pair.
See the section "Sharing Business Copy
Z volumes" in the HP StorageWorks
P9000 Business Copy for Mainframe
Systems User Guide for the relation
between the state of Continuous Access
Synchronous Z pair and the Business
Copy Z operations.
The command has been rejected,
because the specified S-VOL is used as
M-VOL of Continuous Access
Synchronous Z pair.
582607105
262 Message (part code group 7nnn)