Table 62 Error codes (part code 7105) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WPlease contact HP Technical Support.The Swap&Freeze option cannot be
specified, because the mode 80 is on.
86577105
WRelease the relationship to delete the
Compatible FlashCopy pair, or specify
another volume.
The command has been rejected,
because the specified S-VOL is being
used as the T-VOL of a Compatible
FlashCopy pair.
86967105
WRelease the relationship to delete the
Compatible FlashCopy pair, or specify
another volume.
The command has been rejected,
because the specified T-VOL is being
used as the volume of a Compatible
FlashCopy pair.
86977105
WRelease the relationship to delete the
Compatible FlashCopy pair, or specify
another volume.
The command has been rejected,
because the specified volume is being
used as the volume of a Compatible
FlashCopy pair.
86987105
WRelease the relationship to delete the
Compatible FlashCopy pair.
The Reverse Copy or Quick Restore
command has been rejected, because
the specified S-VOL is also being used
as the volume of a Compatible
FlashCopy pair.
86997105
WCorrect the specified CT Group and retry
the operation again.
The command was rejected because the
specified CT Group is already used.
89417105
WInstall the appropriate version of DKC
microcode.
The CT Group operation is not available
because the target DKC microcode
version does not support the CT Group
operation.
89427105
WReset the Split time of Consistency Group
from the mainframe host.
A pair status cannot be changed
because the Split time of Consistency
Group is set.
89467105
WWithdraw the Compatible FlashCopy
relationship.
The command has been rejected,
because the Compatible FlashCopy
relationship exists.
89917105
EInstall additional shared memory.The command has been rejected,
because sufficient amount of shared
memory is not installed.
89927105
ESet the shared memory extension setting
for Compatible FlashCopy.
The command has been rejected,
because the shared memory is not set
for Compatible FlashCopy.
89937105
WWait a while, and retry the operation.The command has been rejected,
because the disk subsystem is busy.
89947105
WWithdraw the Compatible FlashCopy
relationship.
The command has been rejected,
because the Compatible FlashCopy
relationship exists.
89957105
WWait a while, and retry the operation.The command has been rejected,
because the disk subsystem is busy.
89967105
WUse the Reverse Resync option.Quick Restore cannot be executed
because the specified pair is composed
of the external volumes with different
cache mode settings.
556457105
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
563017105
Part code 7105 261
To Next Page
Loading...
