HP StorageWorks P9000 - Page 260

Table 62 Error codes (part code 7105) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WWait until Reverse Copy or Quick
Restore completes.
The command has been rejected,
because the pair sharing the S-VOL was
in the Reverse Copy or Quick Restore
status.
86407105
WYou cannot execute the specified
operation. Release the Reverse Copy for
the operation.
The pairs contain a pair in the Reverse
Copy status.
86417105
WThe Resynchronize Volume Pair
operation cannot be executed in the
current pair status.
See the section "Resynchronize pairs" in
the HP StorageWorks P9000 Business
Copy for Mainframe Systems User Guide
for the relation between the state of pairs
and the Business Copy Z operations.
The Resynchronize Volume Pair
operation has been rejected, because
the specified pair is not in the state of
Split.
86437105
WCheck the pair status.The command has been rejected,
because the pair status is not Split or
Suspend.
86447105
WYou cannot execute the specified
operation. Release the Remote Copy pair
for the operation.
The Reverse Copy command has been
rejected, because the S-VOL is shared
as the M-VOL of a Remote Copy pair.
86457105
WDelete the Remote Copy pair.The Reverse Copy request was rejected,
because the S-VOL was shared with a
Remote Copy pair in the non-suspend
status.
86467105
WDelete the Remote Copy pair.The Reverse Copy command has been
rejected, because the T-VOL is shared
with an M-VOL of a Remote Copy pair.
86477105
WCheck the specified volume number.The boot device and the S-VOL do not
match in the Add Pair command.
86487105
WCheck the specified volume number.Because the boot device is the T-VOL in
the Delete Pair command, the flag does
not match.
86497105
WCheck the specified volume number.The boot device and the S-VOL do not
match in the Add Pair, Resync, or Delete
Pair command.
86507105
WCheck the contents, and then retry.The SSID is invalid.86517105
WCheck the target volume number.The boot device is not an S-VOL nor
T-VOL.
86527105
WCheck the target volume number.Because the boot device is the S-VOL in
the Delete Pair command, the flag does
not match.
86537105
WCheck the target volume number.The boot device and the T-VOL do not
match in the Add Pair, Resync, or Delete
Pair command.
86547105
WCheck the contents, and then retry the
operation.
An invalid secondary SSID is specified
in the Add Pair or Resync command.
86557105
WCheck the contents, and then retry.An invalid secondary SSID is specified
for the Delete Pair or Split Pair
command.
86567105
260 Message (part code group 7nnn)