Table 62 Error codes (part code 7105) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WCheck the volume number.The T-VOL is already defined as an
S-VOL.
86187105
WRelease the Auto LUN setting.The specified T-VOL is defined as a
source volume for Auto LUN.
86197105
WThe P-VOL of Continuous Access
Synchronous Z pair cannot be used as
a reserved volume.
Specify another volume.
The command has been rejected,
because the specified volume is used as
M-VOL of Continuous Access
Synchronous Z pair.
86227105
WThe R-VOL of Continuous Access
Synchronous Z pair cannot be used as
a reserved volume.
Specify another volume.
The command has been rejected,
because the specified volume is used as
R-VOL of Continuous Access Synchronous
Z pair.
86237105
WConfirm whether the volumes specified
for S-VOL and T-VOL are correct or not.
The command has been rejected,
because there is no pair to be operated.
86247105
WCheck the specified volume number.The P-VOL(S-VOL) and S-VOL(T-VOL)
have the same number.
86257105
WAfter the high-speed Split is completed,
retry the operation.
The Simplex command was rejected,
because the high-speed Split was in
progress.
86267105
WWait until the status of the pair changes
to Split.
The Pairresync operation has been
rejected, because pair status is SP-Pend.
86277105
ESelect other pairs.An internal logic contradiction occurred.86287105
WCheck the contents, and retry.The status mode specification is invalid.86297105
WCheck the contents, and retry.The status mode type is invalid.86307105
WPlease contact HP Technical Support.The specified CU number is invalid.86317105
EPlease contact HP Technical Support.The timing of issuing the command is
invalid.
86327105
EPlease contact HP Technical Support.The abnormal status is invalid.86337105
WSpecify other volume(s), or release the
Auto LUN setting.
The volume specified as a reserved
volume is already defined as a reserved
volume for Auto LUN.
86347105
WSpecify other volume(s), or release the
Auto LUN setting.
The specified S-VOL is defined as a
reserved volume for Auto LUN.
86357105
WSpecify other volume(s), or release the
Auto LUN setting.
The specified T-VOL is defined as a
reserved volume for Auto LUN.
86367105
WSpecify other volume(s), or release the
Auto LUN setting.
The specified S-VOL is used as a source
volume for Auto LUN.
86377105
WYou cannot execute the specified
operation. To execute it, release the
setting of Cache Residency Z.
The command has been rejected
because the specified S-VOL is set for
use in Cache Residency Z.
86387105
WYou cannot execute the specified
operation. To execute it, release the
setting of Cache Residency Z.
The command has been rejected
because the specified T-VOL is set for
use in Cache Residency Z.
86397105
Part code 7105 259
To Next Page
Loading...
