HP StorageWorks P9000 User Manual (English)

Other manuals for HP StorageWorks P9000

User Guide322 pages

Configuration Guide165 pages

Software Installation Guide128 pages

Integration Guide29 pages

Reference Guide399 pages

Questions and Answers:

G
Grant SimmonsAug 27, 2025
How to resolve HP Storage Pair-Port Number Mismatch?
- A
  Angela CarlsonAug 27, 2025
  If you encounter a pair-port number mismatch on your HP Storage, indicating the specified port in the secondary system is physically disconnected, ensure: * You've specified the correct secondary system port, correcting if necessary. * The primary and secondary systems ports are connected with cables; connect them if they aren't. * The topology settings of ports on both systems are correct.
X
xsandersAug 27, 2025
How to resolve HP StorageWorks P9000 Pair-Port Type Mismatch?
- J
  Jennifer SanchezAug 27, 2025
  If you encounter a pair-port type mismatch on your HP Storage, indicating the specified port in the secondary system isn't configured as an RCU Target port, ensure that the port is correctly configured.
K
Karen SinghAug 27, 2025
How to fix HP StorageWorks P9000 Storage program error?
- I
  icarterAug 27, 2025
  If a program error is detected on your HP Storage, delete the path using the Delete Path or Delete DKC command, then add the path and secondary system again using the Add Path or Add DKC command.
J
Jennifer JohnsonAug 27, 2025
What to do if HP StorageWorks P9000 Storage status of pairs is not displayed correctly?
- V
  valeriejoyceAug 27, 2025
  If the status of pairs or logical paths isn't displayed correctly on your HP Storage, ensure the correct CU image is selected. Check whether you've selected the correct items or options in Cnt Ac-J windows, such as the DKC Operation window, the Pair Operation window, and the Display Filter dialog box.
J
Jason RodriguezAug 27, 2025
How to resolve Cnt Ac-J error message on HP StorageWorks P9000 Storage?
- J
  John TurnerAug 28, 2025
  If a Cnt Ac-J error message appears on the Remote Web Console computer for your HP Storage, remove the cause of the error, then retry the Cnt Ac-J operation.
R
ryanleAug 28, 2025
What does MCU IMPL mean in HP Storage?
- W
  William OconnorAug 28, 2025
  If the primary HP Storage system couldn't find valid control information in its nonvolatile memory during the IMPL procedure (likely after being without power for over 48 hours), restore the pair (pairresync) from the primary system. Note that the primary system will perform an initial copy operation, copying the entire P-VOL to the S-VOL.
D
Derrick CampbellAug 28, 2025
How to recover from HP StorageWorks P9000 Storage Initial Copy Failed error?
- A
  angela63Aug 28, 2025
  If the primary HP Storage system suspended a pair during the initial copy operation, indicating the data on the S-VOL isn't identical to the P-VOL (possibly due to an invalid track format), release the pair from the primary storage system. Clear all error conditions at the primary storage system, the P-VOL, the secondary storage system, and the S-VOL. Reformat failed tracks using ICKDSF, and restart the initial copy operation using the Add Pair dialog box.
K
Kelly BarnesAug 28, 2025
What does MCU P/S-OFF mean in HP Storage?
- R
  Robert BoltonAug 28, 2025
  If the primary HP Storage system suspended all Cnt Ac-J Z pairs because it was powered off, no action is needed. The primary system automatically restores these pairs when it's powered back on.
A
Alicia BeckAug 28, 2025
Why the CLPR name cannot be changed in HP StorageWorks P9000 Storage?
- G
  Gary MasonAug 28, 2025
  The CLPR name cannot be changed because the name you entered is already in use or is reserved by the system. To resolve this, enter another name.
H
hillthomasAug 28, 2025
Why LU warning message appears when migrating a parity group to another CLPR in HP StorageWorks P9000 Storage?
- J
  John GarciaAug 29, 2025
  When attempting to migrate a parity group to another CLPR, an LU warning message appears because LUSE volumes cannot be set across more than one CLPR.

HP StorageWorks P9000 Specifications

General

RAID Support	RAID 0, 1, 5, 6, 10
Interface	Fibre Channel, iSCSI, FCoE
Form Factor	Rack-mountable
Model	P9000
Operating System Compatibility	Windows, Linux, VMware, HP-UX
Host Interface	Fibre Channel, iSCSI, FCoE
Drive Interface	SAS, SSD
Drive Types Supported	SSD, SAS
Redundancy	Redundant controllers, power supplies, and fans
Management Software	HP StorageWorks Command View