110 Managing servers
Figure 75 Create New Partition wizard: specifying partition size
6. Under Specify Partition Size, enter the Partition size in MB either by clicking the up or down arrows, or
typing the number. Ensure that the size is between the minimum and maximum allowable values. Then
click Next.
The wizard prompts you to assign a drive letter or path.
7. Under Assign Drive Letter or Path, select one of the following options to assign a drive letter or drive
path to the new partition, and then click Next:
•Click Assign the following drive letter to select from the available drive letters on the system.
•Click Mount in the following empty NTFS folder, and click Browse to navigate to the folder.
•Click Do not assign a drive letter or a drive path.
The wizard prompts you to select a format for the partition; see Figure 76.
To Next Page
Loading...
Need help?
General