HP StorageWorks SN6000

HP StorageWorks SN6000 Fibre Channel Switch Command Line Interface Guide 163
Encryption Algorithm that encrypts outbound data or decrypt inbound data.
The encryption algorithm can be one of the following:
• DES-CBC
• 3DES-CBC
• Null
• Blowfish-CBC
• AES-CBC
• Twofish-CBC
EncryptionKey Key string to use in encrypting or decrypting data such as
"123456789012345678901234"
Table 13 Association configuration parameters (continued)
Parameter Description
Operands
delete [association]
Deletes the specified association given by [association] from the Security Association database.
You must enter the ipsec save command afterwards to save your changes.
edit [association]
Opens an edit session in which to change the configuration of an existing association given by
[association]. For descriptions of the association parameters, refer to Table 13. If the connection
is not secure (SSH is disabled), the AuthenticationKey and EncryptionKey values are
masked.
list [option]
Displays the configuration for the policies given by [option]. If you omit [option], the command
displays the configuration of all active associations. [option] can be one of the following:
[association]
Displays the configuration for the association given by [association].
active
Displays the configuration for all active associations.
configured
Displays the configuration for all user-defined associations.
edited
Displays the configuration for all associations that have been modified, but not saved.
rename [association_old] [association_new]
Renames the association given by [association_old] to the association given by
[association_new]. You must enter the ipsec save command afterwards to save your
changes. Dynamic associations cannot be renamed.