External Storage XP user guide 7
3 Storage disk arrays that can be connected as external disk arrays. . . . . . . . . . . . . . . . . . . . . . . . . . . 15
4 External Storage XP requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
5 When external LU’s emulation type is OPEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
6 When external LU’s emulation type is for mainframes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
7 External disk array status values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
8 Mapped external LU status values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
9 Information displayed in the Device column for remote command devices. . . . . . . . . . . . . . . . . . . . . . 94
10 Restrictions on remote command devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
11 General External Storage XP troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96
12 System parameter settings (Thunder 9500V subsystems) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
13 Relationship between serial numbers and subsystem models (Thunder 9500V subsystems) . . . . . . . . . 103
14 Relationship between ports’ WWNs and controllers (Thunder 9500V subsystems) . . . . . . . . . . . . . . . 103
15 Path status and examples of recovery procedures (Thunder 9500V subsystems) . . . . . . . . . . . . . . . . . 104
16 System parameter settings (TagmaStore AMS and TagmaStore WMS subsystems) . . . . . . . . . . . . . . . 105
17 Relationship between serial numbers and subsystem models (TagmaStore AMS and TagmaStore WMS sub-
systems)106
18 Relationship between ports’ WWNs and controllers (TagmaStore AMS and TagmaStore WMS subsystems)
106
19 Path status and examples of recovery procedures (TagmaStore AMS and TagmaStore WMS subsystems). .
107
20 Path status and examples of recovery procedures (XP12000/XP10000 disk arrays) . . . . . . . . . . . . . 108
21 Path status and examples of recovery procedures (XP1024/XP128 disk arrays) . . . . . . . . . . . . . . . . 109
22 Path status and examples of recovery procedures (XP512/XP48 disk arrays) . . . . . . . . . . . . . . . . . . 110
23 External LU’s maximum usable capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113
24 LDEV capacity information for each emulation type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
25 Volume capacity information for each emulation type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115