97
Step Command Remarks
1. Enter system view.
system-view
N/A
2. Enable SNMP
notifications for MPLS TE.
snmp-agent trap enable te
By default, SNMP notifications for
MPLS TE are enabled.
66B
Displaying and maintaining MPLS TE
Execute display commands in any view and reset commands in user view.
Task Command
Display information about explicit paths.
display explicit-path
[ path-name ]
Display link and node information in an IS-IS
TEDB.
display isis mpls te advertisement
[ [
level-1
|
level-2
] | [
originate-system
system-id |
local
] |
verbose
] * [ process-id ]
Display sub-TLV information for IS-IS TE.
display isis mpls te configured-sub-tlvs
[ process-id ]
Display network information in an IS-IS TEDB.
display isis mpls te network
[ [
level-1
|
level-2
] |
local
|
lsp-id
lsp-id ]* [ process-id ]
Display IS-IS tunnel interface information.
display isis mpls te tunnel
[
level-1
|
level-2
]
[ process-id
]
Display DS-TE information.
display mpls te ds-te
Display bandwidth information on MPLS
TE-enabled interfaces.
display mpls te link-management
bandwidth-allocation
[
interface
interface-type
interface-number ]
Display information about discovered PCEs.
display mpls te pce discovery
[ ip-address ]
[
verbose
]
Display PCC and PCE peer information.
display mpls te pce peer
[ ip-address ] [
verbose
]
Display PCC and PCE statistics.
display mpls te pce statistics
[ ip-address ]
Display MPLS TEDB information.
display mpls te tedb
{ {
isis
{
level-1
|
level-2
} |
ospf
area
area-id } |
link
ip-address |
network
|
node
[
local
|
mpls-lsr-id ] |
summary
}
Display information about MPLS TE tunnel
interfaces.
display mpls te tunnel-interface
[
tunnel
number ]
Display information about PCEs discovered by
OSPF.
display ospf
[ process-id ] [
area
area-id ]
mpls te pce
[
originate-router
advertising-router-id |
self-originate
]
Display link and node information in an OSPF
TEDB.
display
ospf
[ process-id ] [
area
area-id ]
mpls
te
advertisement
[
originate-router
advertising-router-id |
self-originate
]
Display network information in an OSPF TEDB.
display
ospf
[ process-id ] [
area
area-id ]
mpls
te
network
[
originate-router
advertising-router-id |
self-originate
]
Display OSPF tunnel interface information.
display
ospf
[ process-id ] [
area
area-id ]
mpls
te
tunnel
Clear PCC and PCE statistics.
reset
mpls te pce statistics
[ ip-address ]
To Next Page
Loading...
Need help?
General