380
Step Command Remarks
7. Redistribute the VPN routes
of the VPN site.
import-route
protocol [ process-id |
all-processes
] [
allow-direct
|
med
med-value
|
route-policy
route-policy-name ] *
By default, no routes are
redistributed into BGP.
123B
Displaying and maintaining MCE
Execute display commands in any view.
Task Command
Display VPN instance information.
display ip vpn-instance
[
instance-name
vpn-instance-name ]
For commands that display routing tables for VPN instances, see Layer 3—IP Routing Command
Reference.
124B
MCE configuration examples
303BConfiguring the MCE that uses OSPF to advertise VPN
routes to the PE
571BNetwork requirements
As shown in 867HFigure 95, VPN 2 runs OSPF. Configure the MCE device to separate routes from
different VPNs and to advertise the VPN routes to PE 1 through OSPF.
To Next Page
Loading...
