HPE FlexNetwork 5510 HI Series

17
Option Description
control-plane
protocol-group
protocol-group-name
Matches a control plane protocol group.
The protocol-group-name argument can be
critical
,
important
,
management
,
monitor
,
normal
, or
redirect
.
customer-dot1p
dot1p-value&<1-8>
Matches 802.1p priority values in inner VLAN tags of double-tagged
packets.
The dot1p-value&<1-8> argument specifies a space-separated list of up to
eight 802.1p priority values. The value range for the dot1p-value argument
is 0 to 7.
customer-vlan-id
vlan-id-list
Matches VLAN IDs in inner VLAN tags of double-tagged packets.
The vlan-id-list argument specifies a space-separated list of up to 10 VLAN
items. Each item specifies a VLAN or a range of VLANs in the form of
vlan-id1
to
vlan-id2. The value for vlan-id2 must be equal to or greater than
the value for vlan-id1. The value range for the vlan-id argument is 1 to
4094.
destination-mac
mac-address
Matches a destination MAC address.
dscp
dscp-value&<1-8>
Matches DSCP values.
The dscp-value&<1-8> argument specifies a space-separated list of up to
eight DSCP values. The value range for the dscp-value argument is 0 to 63
or keywords shown in Table 11.
ip-precedence
ip-precedence-value&<1-8>
Matches IP precedence values.
The ip-precedence-value&<1-8> argument specifies a space-separated
list of up to eight IP precedence values. The value range for the
ip-precedence-value argument is 0 to 7.
protocol
protocol-name
Matches a protocol.
The protocol-name argument can be ARP, IP, or IPv6.
qos-local-id
local-id-value
Matches a local QoS ID in the range of 1 to 4095. The switch supports local
QoS IDs in the range of 1 to 3999.
service-dot1p
dot1p-value&<1-8>
Matches 802.1p priority values in outer VLAN tags.
The dot1p-value&<1-8> argument specifies a space-separated list of up to
eight 802.1p priority values. The value range for the dot1p-value argument
is 0 to 7.
service-vlan-id
vlan-id-list
Matches VLAN IDs in outer VLAN tags.
The vlan-id-list argument specifies a space-separated list of up to 10 VLAN
items. Each item specifies a VLAN or a range of VLANs in the form of
vlan-id1
to
vlan-id2. The value for vlan-id2 must be equal to or greater than
the value for vlan-id1. The value range for the vlan-id argument is 1 to
4094.
source-mac
mac-address Matches a source MAC address.
Defining a traffic behavior
A traffic behavior is a set of QoS actions (such as traffic filtering, shaping, policing, and priority
marking) to perform on a traffic class.
To define a traffic behavior:
Step Command Remarks
1. Enter system view.
system-view
N/A