HPE FlexNetwork 5510 HI Series Acl And Qos Configuration Guide

21
Step Command Remarks
1. Enter system view.
system-view
N/A
2. Enter user profile view.
user-profile
profile-name
The configuration made in user profile view
takes effect only after it is successfully issued
to the driver.
3. Apply the QoS policy.
qos apply policy
policy-name {
inbound
|
outbound
}
By default, no QoS policy is applied to a user
profile.
Use the
inbound
keyword to apply the QoS
policy to the incoming traffic of the device
(traffic sent by the online users). Use the
outbound
keyword to apply the QoS policy to
the outgoing traffic of the device (traffic
received by the online users).
Displaying and maintaining QoS policies
Execute display commands in any view and reset commands in user view.
Task Command
Display traffic class configuration.
display traffic classifier user-defined
[ classifier-name ] [
slot
slot-number ]
Display traffic behavior configuration.
display traffic behavior user-defined
[ behavior-name ] [
slot
slot-number ]
Display QoS and ACL resource usage.
display qos-acl resource
[
slot
slot-number ]
Display QoS policy configuration.
display qos policy user-defined
[ policy-name [
classifier
classifier-name ] ] [
slot
slot-number ]
Display QoS policy configuration on the
specified or all interfaces.
display qos policy interface
[ interface-type interface-number ]
[
inbound
|
outbound
]
Display information about QoS policies
applied to VLANs.
display qos vlan-policy
{
name
policy-name |
vlan
vlan-id }
[
slot
slot-number ] [
inbound
|
outbound
]
Display information about QoS policies
applied globally.
display qos policy global
[
slot
slot-number ] [
inbound
|
outbound
]
Display information about QoS policies
applied to a control plane.
display qos policy control-plane slot
slot-number
Display information about the predefined
QoS policy applied to the control plane.
display qos policy control-plane pre-defined
[
slot
slot-number ]
Clear the statistics of the QoS policy
applied in a certain direction of a VLAN.
reset qos vlan-policy
[
vlan
vlan-id ] [
inbound
|
outbound
]
Clear the statistics for a QoS policy
applied globally.
reset qos policy global
[
inbound
|
outbound
]
Clear the statistics for the QoS policy
applied to a control plane.
reset qos policy control-plane slot
slot-number

HPE FlexNetwork 5510 HI Series Specifications

General

Brand	HPE
Model	FlexNetwork 5510 HI Series
Category	Switch
Language	English