HPE FlexNetwork 5510 HI Series Acl And Qos Configuration Guide

10
Setting the packet filtering default action
Step Command Remarks
1. Enter system view.
system-view
N/A
2. Set the packet filtering
default action to deny.
packet-filter default deny
By default, the packet filter
permits packets that do not match
any ACL rule to pass.
Displaying and maintaining ACLs
Execute display commands in any view and reset commands in user view.
Task Command
Display ACL configuration and match statistics.
display acl
[
ipv6
] { acl-number |
all
|
name
acl-name }
Display whether an ACL has been successfully
applied to an interface for packet filtering.
display packet-filter
{
interface
[ interface-type
interface-number ] [
inbound
|
outbound
] |
interface vlan-interface
vlan-interface-number
[
inbound
|
outbound
] [
slot
slot-number ] }
Display match statistics for packet filtering ACLs.
display packet-filter statistics interface
interface-type interface-number {
inbound
|
outbound
} [ [
ipv6
] { acl-number |
name
acl-name } ] [
brief
]
Display the accumulated statistics for packet filtering
ACLs.
display packet-filter statistics sum
{
inbound
|
outbound
} [
ipv6
] { acl-number |
name
acl-name }
[
brief
]
Display detailed ACL packet filtering information.
display packet-filter verbose interface
interface-type interface-number {
inbound
|
outbound
} [ [
ipv6
] { acl-number |
name
acl-name } ] [
slot
slot-number ]
Display QoS and ACL resource usage.
display qos-acl resource
[
slot
slot-number ]
Clear ACL statistics.
reset acl
[
ipv6
]
counter
{ acl-number |
all
|
name
acl-name }
Clear match statistics (including the accumulated
statistics) for packet filtering ACLs.
reset packet-filter statistics interface
[ interface-type interface-number ] {
inbound
|
outbound
} [ [
ipv6
] { acl-number |
name
acl-name } ]
ACL configuration example
Network requirements
A company interconnects its departments through Device A. Configure an ACL to:
• Permit access from the President's office at any time to the financial database server.
• Permit access from the Financial department to the database server only during working hours
(from 8:00 to 18:00) on working days.
• Deny access from any other department to the database server.

HPE FlexNetwork 5510 HI Series Specifications

General

Brand	HPE
Model	FlexNetwork 5510 HI Series
Category	Switch
Language	English