HPE MSR1000 - Release 0306 P11; New Feature: Voice VLAN; Configuring a Voice VLAN; Configuring a Port to Operate in Automatic Voice VLAN Assignment Mode

21
Use undo dhcp server reply-exclude-option60 to restore the default.
Syntax
dhcp server reply-exclude-option60
undo dhcp server reply-exclude-option60
Default
The DHCP server sends DHCP replies containing Option 60.
Views
System view
Predefined user roles
network-admin
Example
# Configure the DHCP server to send DHCP replies that do not contain Option 60.
<Sysname> system-view
[Sysname] dhcp server reply-exclude-option6
Release 0306P11
This release has the following changes:
New feature: Voice VLAN
Modified feature: MPLS QoS support for matching the EXP field
Modified feature: MPLS QoS support for marking the EXP field
Modified feature: Automatic configuration
Removed feature: Tinyproxy
New feature: Voice VLAN
Configuring a voice VLAN
Configuring a port to operate in automatic voice VLAN assignment mode
Step
Command
Remarks
5. Enter system view.
system-view
N/A
6. (Optional.) Set the voice
VLAN aging timer.
voice-vlan aging
minutes
By default, the aging timer of
a voice VLAN is 1440
minutes.