HPE MSR1000 - Ppp Lcp Sn String

211
Predefined user roles
network-admin
Examples
# Enable the LNS to initiate SN binding authentication requests.
<Sysname> system-view
[Sysname] interface virtual-template 1
[Sysname-Virtual-Template1] ppp lcp imsi request
Related commands
•
ppp lcp sn accept
•
ppp lcp sn string
ppp lcp sn string
Use ppp lcp sn string sn-info to configure the SN information on the client.
Use undo ppp lcp sn string to delete the SN information on the client.
Syntax
ppp lcp sn string sn-info
undo ppp lcp sn string
Default
The client automatically obtains the SN information from its SIM card.
Views
Interface view
Predefined user roles
network-admin
Parameters
string sn-info: Specifies the SN information, a case-sensitive string of 1 to 31 characters.
Examples
# Configure the SN information as sn1.
<Sysname> system-view
[Sysname] interface virtual-template 1
[Sysname-Virtual-Template1] ppp lcp sn string sn1
Related commands
•
ppp lcp sn request
•
ppp lcp sn accept