80
10 -rw- 2166 Jan 22 2014 17:02:02 startup.cfg
11 -rw- 34425 Jan 22 2014 17:02:02 startup.mdb
507492 KB total (438688 KB free)
<HPE>
The output shows the CF card has 438688 KB of free storage space. If the CF card of your
device is not sufficient for the upgrade image, delete unused files.
Downloading the upgrade image file to the router
Using TFTP
Download the upgrade image file (for example, msr4000.ipe) to the CF card on the router.
<HPE>tftp 192.168.1.100 get msr4000.ipe
% Total % Received % Xferd Average Speed Time Time Time Cu
Dload Upload Total Spent Left Speed
45 67.0M 45 30.4M 0 0 792k 0 0:01:26 0:00:39 0:00:47 844k
100 67.0M 100 67.0M 0 0 772k 0 0:01:28 0:01:28 --:--:-- 745k
<HPE>
Using FTP
1. From FTP client view, download the upgrade image file (for example, msr4000.ipe) to the CF
card on the router.
ftp> get msr4000.ipe
msr4000.ipe already exists. Overwrite it? [Y/N]:y
227 Entering passive mode (192,168,1,100,5,20)
125 Using existing data connection
226 Closing data connection; File transfer successful.
37691392 bytes received in 17.7 seconds (2.03 Mbyte/s)
[ftp]
2. Return to user view.
[ftp]quit
221 Service closing control connection
<HPE>
Copying the image file to the root directory of the CF card on the standby MPU
<HPE> copy msr4000.ipe slot1#cfa0:/
Copy cfa0:/msr4000.ipe to slot1#cfa0:/msr4000.ipe?[Y/N]:y
Copying file cfa0:/msr4000.ipe to slot1#cfa0:/ msr4000.ipe...Done.
Upgrading the standby MPU
1. Specify the msr4000.ipe file as the main startup image file for the standby MPU.
<HPE>boot-loader file msr4000.ipe slot 1 main
Verifying the IPE file and the images......Done.
HPE MSR4060 images in IPE:
msr4000-cmw710-boot-e010305.bin
msr4000-cmw710-system-e010305.bin
msr4000-cmw710-security-e010305.bin
To Next Page
Loading...
Need help?
General
