HPE MSR1000

50
New command: display nhrp statistics
Use display nhrp statistics to display NHRP packet statistics for a tunnel interface.
Syntax
display nhrp statistics [ interface tunnel interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface tunnel interface-number: Specifies an mGRE tunnel interface by its number in the range
of 0 to 4095. If you do not specify this option, the command displays NHRP packet statistics for all
tunnel interfaces.
Examples
# Display NHRP packet statistics.
<Sysname> display nhrp statistics
Tunnel0:
NHRP packets sent : 815
Resolution requests : 15
Resolution replies : 1
Registration requests : 0
Registration replies : 797
Purge requests : 2
Purge replies : 0
Error indications : 0
Traffic indications : 0
NHRP packets received : 1453
Resolution requests : 15
Resolution replies : 1
Registration requests : 1435
Registration replies : 2
Purge requests : 0
Purge replies : 0
Error indications : 0
Traffic indications : 0
Tunnel1:
NHRP packets sent : 3
Resolution Requests : 0