HPE MSR1000

80
Parameters
text: Specifies a description, a case-sensitive string of 1 to 80 characters.
Usage guidelines
If multiple IKE proposals exist, you can use this command to configure different descriptions for them
to distinguish them.
Examples
# Configure the description test for the IKE proposal 1.
<Sysname> system-view
[Sysname] ike proposal 1
[Sysname-ike-proposal-1] description test
New command: display ike statistics
Use display ike statistics to display IKE statistics.
Syntax
display ike statistics
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display IKE statistics.
<Sysname> display ike statistics
IKE statistics:
No matching proposal: 0
Invalid ID information: 0
Unavailable certificate: 0
Unsupported DOI: 0
Unsupported situation: 0
Invalid proposal syntax: 0
Invalid SPI: 0
Invalid protocol ID: 0
Invalid certificate: 0
Authentication failure: 0
Invalid flags: 0
Invalid message id: 0
Invalid cookie: 0
Invalid transform ID: 0
Malformed payload: 0
Invalid key information: 0