HPE MSR1000 - New Feature: E&M Logging; Command Reference; Em Log Enable

220
Parameters
domain-name: Specifies the SIP domain name, a case-insensitive string of 1 to 31 characters. Valid
characters are letters, digits, underscore (_), hyphen (-), and dot (.).
Examples
# Populate the CONTACT header field of outgoing SIP packets with the SIP domain name abc.com.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] sip
[Sysname-voice-sip] sip-domain abc.com
New feature: E&M logging
This feature enables the router to generate E&M logs.
Command reference
em log enable
Use em log enable to enable E&M logging.
Use undo em log enable to disable E&M logging.
Syntax
em log enable
undo em log enable
Default
E&M logging is disabled.
Views
Voice view
Predefined user roles
network-admin
Usage guidelines
This command enables the router to generate E&M logs.
Examples
# Enable E&M logging.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] em log enable