HPE MSR1000 - Release 0304 P02; New Feature: IMSI;SN Binding Authentication

207
New Syntax
High encryption (in non-FIPS mode):
esp encryption-algorithm { 3des-cbc | aes-cbc-128 | aes-cbc-192 | aes-cbc-256 | des-cbc | null
| sm1-cbc-128 | sm1-cbc-192 | sm1-cbc-256 | sm4-cbc } *
Views
IPsec transform set view
Change description
The sm4-cbc keyword was added to support the CBC-mode SM4 algorithm, which uses a 128-bit
key.
Release 0304P02
This release has the following changes:
New feature: IMSI/SN binding authentication
New feature: Specifying a band for a 4G modem
New feature: CFD
New feature: Using tunnel interfaces as OpenFlow ports.
New feature: NETCONF support for ACL filtering
New feature: Specifying a backup traffic processing unit
New feature: WAAS
New feature: Support for the MKI field in SRTP or SRTCP packets
New feature: SIP domain name
New feature: E&M logging
Modified feature: Setting the global link-aggregation load-sharing mode
New feature: IMSI/SN binding authentication
This feature enables the device to include the IMSI/SN information in the LCP authentication
information.