HPE MSR1000

29
Command reference
ppp access-control enable
Use ppp access-control enable to enable L2TP-based EAD.
Use undo ppp access-control enable to disable L2TP-based EAD.
Syntax
ppp access-control enable
undo ppp access-control enable
Default
L2TP-based EAD is disabled.
Views
VT interface view
Predefined user roles
network-admin
Usage guidelines
This command does not apply to VA interfaces that already existed in the VT interface. It only applies
to newly created VA interfaces.
Different ACLs are required for different users if the VT interface is used as the access interface for
the LNS.
After L2TP-based EAD is enabled, the LNS transparently passes CAMS/IMC packets to the iNode
client to inform the client of EAD server information, such as the IP address.
Examples
# Enable L2TP-based EAD.
<Sysname> system-view
[Sysname] interface virtual-template 10
[Sysname-Virtual-Template10] ppp access-control enable
display ppp access-control interface
Use display ppp access-control interface to display access control information for VA interfaces
on a VT interface.
Syntax
display ppp access-control interface { interface-type interface-number | interface-name }
Views
Any view
Predefined user roles
network-admin