HPE MSR1000 - Modified Feature: Automatic Configuration; Feature Change Description; Command Changes; Modified Feature: Software Image Signature

34
Views
System view
Change description
The per-packet keyword was added to the ip load-sharing mode command to support per-packet
load sharing.
Modified feature: Automatic configuration
Feature change description
A limit was added to the number of automatic configuration attempts. If the device fails to be
automatically configured within the limit, the device quits the automatic configuration process.
Command changes
None
Modified feature: Software image signature
Feature change description
A field was added to output from a set of display commands to display software image signature
information.
Command changes
Modified command: display install active
Syntax
Centralized devices:
display install active [ verbose ]
Centralized IRF devices–Distributed devices–In standalone mode:
display install active [ slot slot-number ] [ verbose ]
Distributed devices–In IRF mode:
display install active [ chassis chassis-number slot slot-number ] [ verbose ]
Views
Any view
Change description
The Software image signature field was added to display software image signature information.