HPE MSR1000 - Table 20 Bootware Menu Options

85
* *
****************************************************************************
Copyright (c) 2010-2013 Hewlett-Packard Development Company, L.P.
Compiled Date : Jun 22 2013
CPU ID : 0x1
Memory Type : DDR3 SDRAM
Memory Size : 1024MB
Flash Size : 2MB
Nand Flash size : 256MB
CPLD Version : 2.0
PCB Version : 3.0
BootWare Validating...
Press Ctrl+B to access EXTENDED-BOOTWARE MENU...
2. Press Ctrl + B to access the BootWare menu.
Password recovery capability is enabled.
Note: The current operating device is flash
Enter < Storage Device Operation > to select device.
===========================<EXTEND-
BOOTWARE MENU>===========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration
|
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Skip authentication for console login
|
|<9> Storage Device Operation |
|<0> Reboot
|
===================================================================
=========
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Enter your choice(0-9):
Table 20 BootWare menu options
Item
Description
<1> Boot System Boot the system software image.
<2> Enter Serial SubMenu
Access the Serial submenu (see Table 23 ) for upgrading
system software through the console port or changing the
serial port settings.
<3> Enter Ethernet SubMenu
Access the Ethernet submenu (see Table 21) for upgrading
system software through an Ethernet port or changing
Ethernet settings.
<4> File Control
Access the File Control submenu (see Table 24) to retrieve
and manage the files stored on the router.