25
Display the voice VLAN state.
display voice-vlan state
Display OUI addresses on a device.
display voice-vlan mac-address
Command reference
The following commands were added:
display voice-vlan mac-address.
display voice-vlan state.
voice-vlan aging.
voice-vlan enable.
voice-vlan mac-address.
voice-vlan mode auto.
voice-vlan security enable.
voice-vlan track lldp.
For more information about these commands, see H3C MSR Series Routers Layer 2—LAN
Switching Command Reference(V7).
Modified feature: MPLS QoS support for matching the
EXP field
Matching the EXP field in the second MPLS label
In this release, MPLS QoS supports matching the EXP fields in both the topmost (first) MPLS label
and the second MPLS label.
Command reference
New command: if-match second-mpls-exp
Use if-match second-mpls-exp to define a criterion to match the EXP field in the second MPLS
label.
Use undo if-match second-mpls-exp to delete the match criterion.
Syntax
if-match [ not ] second-mpls-exp exp-value&<1-8>
undo if-match [ not ] second-mpls-exp exp-value&<1-8>
To Next Page
Loading...
