HPE MSR1000 User Manual

94
Views
IKEv2 peer view
Predefined user roles
network-admin
Parameters
name: Specifies the host name of the IKEv2 peer, a case-insensitive string of 1 to 253 characters.
Usage guidelines
Only the initiator can look up an IKEv2 peer by host name in IKEv2 negotiation, and the initiator must
use an IPsec policy rather than an IPsec profile.
Examples
# Create an IKEv2 keychain named key1.
<Sysname> system-view
[Sysname] ikev2 keychain key1
# Create an IKEv2 peer named peer1.
[Sysname-ikev2-keychain-key1] peer peer1
# Specify the host name test of the IKEv2 peer.
[Sysname-ikev2-keychain-key1-peer-peer1] hostname test
Related commands
•
ikev2 keychain
•
peer
New command: identity
Use identity to specify the ID of an IKEv2 peer.
Use undo identity to restore the default.
Syntax
identity { address { ipv4-address | ipv6 { ipv6-address } } | fqdn fqdn-name | email email-string |
key-id key-id-string }
undo identity
Default
An IKEv2 peer's ID is not specified.
Views
IKEv2 peer view
Predefined user roles
network-admin

HPE MSR1000 Specifications

General

Brand	HPE
Model	MSR1000
Category	Network Router
Language	English