105
[Sysname-ikev2-proposal-prop1] authentication-algorithm sha1
[Sysname-ikev2-proposal-prop1] prf sha1
[Sysname-ikev2-proposal-prop1] dh group2
Related commands
encryption-algorithm
integrity
prf
dh
New command: inside-vrf
Use inside-vrf to specify an inside VPN instance.
Use undo inside-vrf to restore the default.
Syntax
inside-vrf vrf-name
undo inside-vrf
Default
No inside VPN instance is specified. The internal and external networks are in the same VPN
instance. The device forwards protected data to this VPN instance.
Views
IKEv2 profile view
Predefined user roles
network-admin
Parameters
vrf-name: Specifies the VPN instance to which the protected data belongs. The vrf-name argument
represents the VPN instance name, a case-sensitive string of 1 to 31 characters.
Usage guidelines
This command determines where the device should forward received IPsec packets after it
de-encapsulates them. If you configure this command, the device looks for a route in the specified
VPN instance to forward the packets. If you do not configure this command, the internal and external
networks are in the same VPN instance. The device looks for a route in this VPN instance to forward
the packets.
Examples
# Create an IKEv2 profile named profile1.
<Sysname> system-view
[Sysname] ikev2 profile profile1
# Specify the inside VPN instance vpn1.
To Next Page
Loading...
