73
<HPE> display boot-loader
Software images on the device:
Current software images:
flash:/msr2000-cmw710-boot-a0004.bin
flash:/msr2000-cmw710-system-a0004.bin
flash:/msr2000-cmw710-security-a0004.bin
flash:/msr2000-cmw710-voice-a0004.bin
flash:/msr2000-cmw710-data-a0004.bin
Main startup software images:
flash:/msr2000-cmw710-boot-a0005.bin
flash:/msr2000-cmw710-system-a0005.bin
flash:/msr2000-cmw710-security-a0005.bin
flash:/msr2000-cmw710-voice-a0005.bin
flash:/msr2000-cmw710-data-a0005.bin
Backup startup software images:
None
<HPE>
Rebooting and completing the upgrade
1. Reboot the router.
<HPE>reboot
Start to check configuration with next startup configuration file, please
wait.........DONE!
This command will reboot the device. Continue? [Y/N]:y
Now rebooting, please wait...
<HPE>
System is starting...
2. After the reboot is complete, verify that the system software image is correct.
<HPE> display version
HPE Comware Software, Version 7.1.042, Release 000702
Copyright (c) 2010-2013 Hewlett-Packard Development Company, L.P.
HPE MSR2003 uptime is 0 weeks, 0 days, 13 hours, 23 minutes Last
reboot reason : User reboot
Boot image: flash:/msr2000-cmw710-boot-a0005.bin
Boot image version: 7.1.040, Alpha 0005
System image: flash:/msr2000-cmw710-system-a0005.bin
System image version: 7.1.040, Alpha 0005
CPU ID: 0x1
1G bytes DDR3 SDRAM Memory
2M bytes Flash Memory
PCB Version: 3.0
CPLD Version: 1.0
Basic BootWare Version: 1.04
Extended BootWare Version: 1.04
[SLOT 0]AUX (Hardware)3.0 (Driver)1.0, (
Cpld)1.0
[SLOT 0]GE0/0 (Hardware)3.0 (Driver)1.0, (Cpld)1.0
[SLOT 0]GE0/1 (Hardware)3.0 (Drive
To Next Page
Loading...
