5. Plug in the USB device into the internal USB port.
6. Install the chassis cover on page 27.
7. Connect all peripheral cables to the server.
8. Connect the power cord to the server power jack, and then to the AC source.
9. Power up the server on page 22.
For more information on any required setup or configuration procedure, see the USB device documentation.
External HPE RDX Backup System option
To install a simple, inexpensive, and reliable way to securely store your data backups, install an external HPE
RDX Backup System. The backup system is a removable, ruggedized, hard disk drive system.
The backup system consists of two components:
•
RDX cartridge
• RDX docking station
Hewlett Packard Enterprise recommends that no more than one HPE RDX Removable Disk Backup System
be connected to a system at a time.
For more information on installing and configuring the external HPE RDX Removable Disk Backup System,
see the Storage section of the Hewlett Packard Enterprise Information Library:
http://www.hpe.com/info/storage/docs
HP Trusted Platform Module
The TPM is a hardware-based system security feature that can securely store information, such as
passwords and encryption keys, which can be used to authenticate the platform.
The TPM works with Microsoft Windows BitLocker which is a data protection feature available in Microsoft
Windows Server 2008 R2 SP1 and later operating systems. BitLocker helps protect user data and helps
ensure that a server running Windows Server has not been tampered with while the system was offline.
This server supports TPM 2.0. T
o prevent possible damage to the TPM or to the system board, the TPM
cannot be removed from the board once it has been installed.
External HPE RDX Backup System option 51
To Next Page
Loading...
Need help?
General
