HPE ProLiant MicroServer Gen10 User Manual

Component identification
This chapter describes the external and internal server features and components.
Front panel components
5
6 1
2
3
4
Item Component Description
1 Drive bays (4, behind the front
bezel)
By default, the drive bays support 3.5-inch LFF SATA drives.
To support 2.5-inch SFF drives, install the SFF drive converter
option.
2 Front bezel unlock indicator To remove the front bezel from the chassis, this groove must
show the blue indicator.
3 Front bezel lock indicator To lock the front bezel in the chassis, this groove must show
the blue indicator.
4 Front bezel To access the front drive bays, remove this bezel.
5 USB 3.0 ports (2) Connect USB 3.0 devices to these ports. USB 3.0 support
after POST varies by operating system.
6 Media bay When the relevant enablement options kits are installed, this
bay supports either a slim-type optical disc drive or solid state
drive option.
6 Component identification

HPE ProLiant MicroServer Gen10 Specifications

General

Product Line	HPE ProLiant
Server Type	MicroServer
Maximum Memory	32 GB
Memory Slots	2
Expansion Slots	1 PCIe 3.0 x8 slot
Form Factor	Ultra Micro Tower
Processor	AMD Opteron X3000 series
Memory Type	DDR4 ECC UDIMM
Storage	4 LFF non-hot plug drive bays
Network	2 x 1GbE ports
Power Supply	200W Non-Hot-Plug, Non-Redundant Power Supply
Dimensions	23.5 x 23 x 25.4 cm
Operating System Support	Microsoft Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server
Management	HPE iLO Standard
RAID Support	HPE Smart Array S100i SR Gen10 (RAID 0, 1, 10)