Low-profile LFF drive LED definitionsLow-profile LFF drive LED definitions
ItemItem LEDLED StatusStatus DefinitionDefinition
1 Fault\Locate Solid amber The drive has failed.
Solid blue The drive is operating normally and being identified by a management
application.
Flashing amber/blue
(1 flash per second)
The drive has failed, or a predictive failure alert has been received for this
drive; it also has been identified by a management application.
Flashing amber
(1 flash per second)
A predictive failure alert has been received for this drive. Replace the drive
as soon as possible.
2 Online\Activity Solid green The drive is online and has no activity.
Flashing green
(4 flashes per second)
The drive is operating normally and has activity.
Flashing green
(1 flash per second)
The drive is doing one of the following:
Rebuilding
Performing a RAID migration
Performing a strip size migration
Performing a capacity expansion
Performing a logical drive extension
Erasing
Spare part activation
Off The drive is not configured by a RAID controller or a spare drive.
Smart Carrier (SC) drive LED definitionsSmart Carrier (SC) drive LED definitions
To Next Page
Loading...
