Replacing a processorReplacing a processor
CAUTION: CAUTION: Failure to completely open the processor locking lever prevents the processor from seating during
installation.
PrerequisitesPrerequisites
Before you perform this procedure, make sure that you have the following items available:
T-15 Torx screwdriver
Torque screwdriver
Alcohol wipe
1.0 gm (0.5 ml) or two 0.5 gm (0.25 ml) of thermal grease
ProcedureProcedure
1. Do not touch the socket contacts or the bottom of the processor.
To Next Page
Loading...
