HPE ProLiant ML30 Gen10

To replace the component, reverse the removal procedure.
Removing and replacing an LFF hot-plug driveRemoving and replacing an LFF hot-plug drive
CAUTION: CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays are populated
with either a component or a blank.
ProcedureProcedure
1. Back up all server data on the drive.
2. Remove the front bezel .
3. Determine the status of the drive from the drive LED definitions .
4. Remove the drive.
To replace the component, reverse the removal procedure.
Caution: All bays must be populatedCaution: All bays must be populated
HPE ProLiant ML30 Gen10 Server Maintenance and Service Guide 43