Removing and replacing the front bezelRemoving and replacing the front bezel
ProcedureProcedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Disconnect all peripheral cables from the server.
4. Do one of the following:
If the server is in tower mode: Position the tower server for hardware configuration.
If the server is in rack mode: Remove the server from the rack .
5. Remove the front bezel:
a. If locked, unlock the front bezel.
b. Open the front bezel.
c. Pull the front bezel away from the chassis.
To Next Page
Loading...
