Efficiency At 115 VAC:
No less than 87% at 100% load
No less than 90% at 50% load
No less than 87% at 20% load
At 230 VAC:
No less than 88% at 100% load
No less than 92% at 50% load
No less than 88% at 20% load
Power supply outputPower supply output —
Rated steady-state power 350 W at 115 VAC
350 W at 230 VAC
Maximum peak power 385 W at 115 VAC
385 W at 230 VAC
Rated output power 350 W
SpecificationSpecification ValueValue
HPEHPE 500 W Flex Slot Platinum Hot-plug Low Halogen Power Supply 500 W Flex Slot Platinum Hot-plug Low Halogen Power Supply
SpecificationSpecification ValueValue
Input requirementsInput requirements —
Rated input voltage 100 VAC to 240 VAC
240 VDC for China only
Rated input frequency 50 Hz to 60 Hz
Not applicable to 240 VDC
Rated input current 5.6 A at 100 VAC
2.7 A at 200 VAC
2.3 A at 240 VDC for China only
Maximum rated input power 557 W at 100 VAC
539 W at 200 VAC
537 W at 240 VDC for China only
BTUs per hour 1902 at 100 VAC
1840 at 200 VAC
1832 at 240 VDC for China only
Power supply outputPower supply output —
Rated steady-state power 500 W at 100 VAC to 127 VAC input
500 W at 100 VAC to 240 VAC input
500 W at 240 VDC input for China only
To Next Page
Loading...
